MOT Status
ValidMileage
110,764 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Central Rear Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))
Coil spring corroded both front (5.3.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Service brake fluctuating, but not excessively both rear (1.2.1 (e))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))
Coil spring corroded both front (5.3.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Service brake fluctuating, but not excessively both rear (1.2.1 (e))
Centre stop light not working
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Centre stop light not working
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Windscreen washer provides insufficient washer liquid (3.5 (a))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Windscreen washer not working (3.5 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Power steering fluid level below minimum (2.1.5 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive floor to sill (7.1.1 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive floor to sill (7.1.1 (a) (i))
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive floor to sill (7.1.1 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive floor to sill (7.1.1 (a) (i))
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Slight corrosion nearside floor to sill
Slight corrosion nearside floor to sill
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Rear Brake pad(s) wearing thin (3.5.1g)
Slight corrosion nearside floor to sill
Slight corrosion nearside floor to sill
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor to sill (5.2.6)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor to sill (5.2.6)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor to sill (5.2.6)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive floor to sill (5.2.6)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nail in nearside rear tyre
Front Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
How Reliable is the Mazda 5?
Based on 413,409 MOT tests across 26,269 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YS07 VRL is a 2007 Mazda 5 in Grey with a 1,798cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 2007 Mazda 5 models, the average MOT pass rate is 68.5% with a typical mileage of 76,301 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 5 fails its MOT is shock absorber has a serious fluid leak, accounting for 13,334 recorded failures. If you're considering buying YS07 VRL, it's worth having these areas checked by a mechanic before committing.
The Mazda 5 typically stays on UK roads for around 21 years. At 19 years old, this Mazda 5 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YS07 VRL?
You can check the full history of YS07 VRL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YS07 VRL registered?
YS07 VRL is a 2007 Mazda 5, first registered on 30 June 2007.
Is YS07 VRL safe to buy?
The MOT history for YS07 VRL shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YS07 VRL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YS07 VRL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.