MOT Status
ExpiredMileage
63,767 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Subframe mounting (6.1.1 (c) (i))
Offside Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leaking excessively from engine (8.4.1 (a) (i))
Windscreen washer not working (3.5 (a))
Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Subframe mounting (6.1.1 (c) (i))
Offside Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill corroded and holed,(Prescribed area of subframe mounting) (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Shock absorbers has an excessively worn bush Lower bush (5.3.2 (c))
Offside Rear Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Nearside Rear Bumper likely to become detached (6.1.4 (a) (ii)) DANGEROUS
Nearside Front Shock absorbers has a slightly worn bush Lower bush (5.3.2 (c))
Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Floor/inner sill (6.1.1 (c) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Floor/inner sill (6.1.1 (c) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Floor/inner sill (6.1.1 (c) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Floor/inner sill (6.1.1 (c) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge 2.5 mm (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge 2.0 mm (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Shock absorber has a slightly worn bush (2.7.4)
Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Sub-frame corroded but not seriously weakened both (2.4.G.1)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement 'D' bushes (2.4.G.2)
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
front brake excessively fluctuating (3.7.B.3)
rear brake excessively fluctuating (3.7.B.3)
Front Shock absorber has a slightly worn bush (2.7.4)
Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Sub-frame corroded but not seriously weakened both (2.4.G.1)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front brake disc worn, pitted or scored, but not seriously weakened both sides inner edges (3.5.1i)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Sub-frame rubber bush deteriorated resulting in excessive movement corroded (2.4.G.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front brake disc worn, pitted or scored, but not seriously weakened both sides inner edges (3.5.1i)
Nearside Registration plate lamp not working (1.1.C.1d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Play in steering rack inner joint(s)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Upper Suspension arm has slight play in a pin/bush (2.4.G.2)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm corroded and seriously weakened (2.4.G.1)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Lower Suspension arm corroded and seriously weakened (2.4.G.1)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Parking brake: efficiency below requirements (3.7.B.7)
front brake application uneven (3.7.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Sub-frame attachment bracket/mounting worn and its strength is seriously reduced (2.4.G.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Brake pipe slightly corroded (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.3.D.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
rear discs badly corroded
Nearside Registration plate lamp not working (1.1.C.1d)
both front tyres perished in tread
both front tyres perished in tread
How Reliable is the MG Tf?
Based on 475,348 MOT tests across 28,732 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YS54 URU is a 2004 MG Tf in Black with a 1,796cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 56.3%.
Across all 2004 MG Tf models, the average MOT pass rate is 72.6% with a typical mileage of 43,805 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a MG Tf fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 17,890 recorded failures. If you're considering buying YS54 URU, it's worth having these areas checked by a mechanic before committing.
The MG Tf typically stays on UK roads for around 24 years. At 22 years old, this MG Tf is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YS54 URU?
You can check the full history of YS54 URU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YS54 URU registered?
YS54 URU is a 2004 MG Tf, first registered on 30 November 2004.
Is YS54 URU safe to buy?
The MOT history for YS54 URU shows 32 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YS54 URU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YS54 URU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.