2006 Mazda 3

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Floor (6.1.1 (c) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Various rear suspension components corroded

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt Upper & lower (5.3.4 (b) (ii))

Nearside Headlamp levelling device inoperative (4.1.5 (a))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Floor (6.1.1 (c) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Various rear suspension components corroded

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge 205/55/16 (5.2.3 (e))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Tyre tread depth below requirements of 1.6mm 205/55/16 (4.1.E.1)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

rear discs corroded

Nearside Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)