2006 Mazda 6

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Front constant velocity joint is insecure (2.5.C.1b)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front front brake binding (3.7.B.1)

Centre Front registration plate deteriorated but not likely to be misread (6.3.1d)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Under-trays fitted obscuring some underside components

exhaust corroded

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Child seat fitted not allowing full inspection of adult belt

Engine covers fitted obscuring some components in the engine bay

Exhaust system corroded

Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside rear tyre damaged and perished on outer sidewall but not to cords

Parking brake lever has little reserve travel (3.1.6b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Panhard rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

Various steering and suspension components starting to corrode

Both sides inner and outer sills starting to corrode

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Child seat fitted not allowing full inspection of adult belt

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front and rear brake discs worn

Nearside rear tyre starting to perish

Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Various suspension components starting to corrode

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Mechanical brake component has restricted free movement (3.5.1k)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear reflector missing (1.5.1a)