2007 Smart (mcc) Fortwo Coupe

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive slight underbody corrosion (5.3.6 (a) (i))

Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all round corrosion (5.3.6 (a) (i))

Horn not working (7.7 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Play in steering rack inner joint(s) ()

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Front Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Fuel cap/sealing device sealing washer torn (7.2.4c)

Nearside Front Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside rear brake binding (3.7.B.1)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front coil spring broken (2.4.C.1a)

Engine covers fitted obscuring some components in the engine bay

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Under-trays fitted obscuring some underside components

exhaust corroded

rear brakes tight

Engine covers fitted obscuring some components in the engine bay

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front coil spring fractured (2.4.C.1a)

Under-trays fitted obscuring some underside components

exhaust corroded

rear brakes tight

Engine covers fitted obscuring some components in the engine bay

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components