2005 Mazda 6

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

heavy surface corrosion on all rear suspention components

unable to check outersills due to plastic coverings

Front front brake application uneven (3.7.B.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front front brake binding (3.7.B.1)

Offside Rear Stop lamp not working (1.2.1b)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

heavy surface corrosion on all rear suspention components

unable to check outersills due to plastic coverings

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Under-trays fitted obscuring some underside components

both inner sills slightly corroded

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Under-trays fitted obscuring some underside components

both inner sills slightly corroded

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside rear brake grabbing slightly (3.7.A.5b)

Offside Front Lower Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Under-trays fitted obscuring some underside components

both inner sills corroded

both outer sills corroded

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Braking system leaking (3.6.A.1) DANGEROUS

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside rear brake grabbing slightly (3.7.A.5b)

Offside Front Lower Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Under-trays fitted obscuring some underside components

both inner sills corroded

both outer sills corroded

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Headlamp not working on dipped beam (1.7.5a)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)