2007 Peugeot 107

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Lower Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Lower Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Rear Crash Bar support mounts Excessivly corroded o\s\r and n\s\r

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Upper Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Lower Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Lower Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Rear Crash Bar support mounts Excessivly corroded o\s\r and n\s\r

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Shock absorbers has slight external damage to the casing Rusted (5.3.2 (b))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Offside Rear Shock absorbers has slight external damage to the casing Rusted (5.3.2 (b))

Suspension component corroded but not seriously weakened Rear Axle (5.3.3 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Shock absorbers has slight external damage to the casing Rusted (5.3.2 (b))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Offside Rear Shock absorbers has slight external damage to the casing Rusted (5.3.2 (b))

Suspension component corroded but not seriously weakened Rear Axle (5.3.3 (b) (i))

Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

surface corrosion all inner and outer sills and steering and susp mounts

Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

front and rear shockers corroded

surface corrosion all inner and outer sills and subframes and steering and susp mounts

Horn not working (7.7 (a) (ii))

Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

front and rear shockers corroded

surface corrosion all inner and outer sills and subframes and steering and susp mounts

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement perished (5.3.4 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement perished (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement perished (5.3.4 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement perished (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Position lamp not working Rb501 (4.2.1 (a))

Offside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Vehicle structure has slight corrosion rear axle mounts (6.1.B.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Vehicle structure has slight corrosion rear axle mounts (6.1.B.2)

Rear Trailing arm corroded but not seriously weakened axle (2.4.G.1)

front brake fluctuating, but not excessively (3.7.B.3)

general corrosion through out under side of vehicle

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Registration plate lamp not working (1.1.C.1d)

Tyre tread depth below requirements of 1.6mm both front (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

front tyres close to legal limit on inner edges

Items removed from driver's view prior to test

Items removed from driver's view prior to test

Offside Front Road wheel bead rim badly distorted (4.2.A.1a)

Centre Windscreen wiper blade insecure (8.2.2)

Horn not working (1.6.2a)

Front Brake pad(s) wearing thin (3.5.1g)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)