MOT Status
ValidMileage
208,202 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Front Play in steering rack inner joint(s) tie-rod ()
Front Registration plate insecure but not likely to fall off (0.1 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Brake disc worn, but not excessively both sides (1.1.14 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Front Play in steering rack inner joint(s) tie-rod ()
Front Registration plate insecure but not likely to fall off (0.1 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Rear Brake disc worn, but not excessively both sides (1.1.14 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))
Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sides (6.2.2 (d) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Windscreen wiper blade defective (3.4 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))
Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sides (6.2.2 (d) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Windscreen wiper blade defective (3.4 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))
Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Registration plate deteriorated but not likely to be misread dirty (0.1 (b))
Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Headlamp aim too high (4.1.2 (a))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))
Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))
Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Registration plate deteriorated but not likely to be misread dirty (0.1 (b))
Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Inner Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Front Inner Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar linkage ball joint has slight play both (5.3.4 (a) (i))
Subframe mounting prescribed area is corroded but not considered excessive front and rear (5.3.6 (a) (i))
exhaust flexi deteriorated
surface rust underneath body
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Rear Exhaust mounting defective And middle (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread Broken (0.1 (b))
Rear Registration plate insecure but not likely to fall off (0.1 (a))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Rear Exhaust mounting defective And middle (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread Broken (0.1 (b))
Rear Registration plate insecure but not likely to fall off (0.1 (a))
front tyres getting low
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
front tyres getting low
Front Suspension component mounting prescribed area is corroded but not considered excessive both floors / sill areas (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive both floor to sill areas (7.1.1 (a) (i))
trims and covers fitted to vehicle
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Engine coolant low
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced floor to sill (vehicle length) (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced Floor to sill (vehicle length) (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Under trays fitted
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Engine coolant low
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced floor to sill (vehicle length) (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced Floor to sill (vehicle length) (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Under trays fitted
Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))
Front Brake pad(s) wearing thin (3.5.1g)
Oil leak ()
Play in steering rack inner joint(s) ()
Rear Suspension component mounting prescribed area is corroded but not considered excessive sill backs and chassis area (2.4.A.3)
trims and covers fitted
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too low (1.8)
Oil leak ()
Play in steering rack inner joint(s) ()
Rear Suspension component mounting prescribed area is corroded but not considered excessive sill backs and chassis area (2.4.A.3)
trims and covers fitted
plastic covers fitted
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
plastic covers fitted
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
slight handbrake travel but ok for mot test
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YT08 PXN is a 2008 Mazda 3 in Silver with a 1,598cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 57.1%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying YT08 PXN, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YT08 PXN?
You can check the full history of YT08 PXN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YT08 PXN registered?
YT08 PXN is a 2008 Mazda 3, first registered on 1 March 2008.
Is YT08 PXN safe to buy?
The MOT history for YT08 PXN shows 28 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YT08 PXN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YT08 PXN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.