2010 Skoda Octavia

Brake wear sensor broken.

Corrosion on all brake discs.

Corrosion on both outer sills

Offside Front Accident damage on offside front wing.

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Offside front brake pads wearing low.

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Both rear shock absorber bump stops insecure

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Brake wear sensor broken.

Corrosion on all brake discs.

Corrosion on both outer sills

Nearside Front Steel wheel fitted

Offside Front Accident damage on offside front wing.

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Offside front brake pads wearing low.

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Both rear shock absorber bump stops insecure

Both rear shock absorber dust boots insecure

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure Inner side wall (5.2.3 (d) (ii)) DANGEROUS

Both rear shock absorber dust boots insecure

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Both rear shock absorber dust boots insecure

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Both rear shock absorber dust boots insecure

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Both rear shock absorber dust boots insecure

Offside Front Tyre worn close to legal limit/worn on edge BORDERLINE LEGAL (5.2.3 (e))

Offside Rear Parking brake slightly binding O/S

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Parking brake slightly binding O/S

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear bump stop detached

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear bump stop detached

Parking brake lever defective but can be satisfactorily operated interior handbrake guide stiff (1.1.6 (d))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge inner edge scrubbed (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Offside Headlamp aim too high (1.8)

Under-trays fitted obscuring some underside components

osr tyre worn uneven on inner edge

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

osr tyre worn uneven on inner edge

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components