2001 Mercedes-benz Vito

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Nearside Rear Other passenger door likely to open inadvertently or not remain closed in the case of a sliding door (6.2.3 (b) (i))

Nearside Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Vehicle Identification Number not displayed (0.2 (a))

Nearside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

towbar removed for time of re-test

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Brake load sensing valve stiff (3.6.E.3)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Registration plate lamp insecure (1.1.C.1c)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Vehicle structure excessively corroded within 30cm of towbar mounting rear cross member (6.6.6)

Brake load sensing valve stiff (3.6.E.3)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Stop lamp not working (1.2.1b)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

offside front sill corroded

rear crossmember damage

suspension stiff

Offside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Outer Rear brake disc slightly pitted (3.5.1h)

Offside Outer Rear brake disc slightly pitted (3.5.1h)

Nearside Outer Rear brake disc slightly pitted (3.5.1h)

Offside Outer Rear brake disc slightly pitted (3.5.1h)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)