2004 Subaru Impreza

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Near shock top mount (5.3.6 (a) (i))

Offside headlamp output weak

Parking brake required effort only just met

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))

Horn not working (7.7 (a))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Brake discs rusty, possibly from standing? monitor after use

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch/sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch/sill (5.3.6 (a) (i))

Central Rear Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Offside Rear Anti-roll bar attachment bracket/mounting fractured (5.3.3 (b) (ii)) DANGEROUS

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive both sills (5.3.6 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front All direction indicators slightly discoloured x2 (4.4.3 (a))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Nail in tyre X 2 ()

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

damage and corrosion to front cross rail and sub-frame

front tyres are wearing on inner edge

Rear Brake pipe slightly corroded (3.6.B.2c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Engine check light illuminated.

Front Vehicle structure has slight corrosion Cross member holed. (6.1.A.1)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Parking brake lever has little reserve travel (3.1.6b)

Central Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust Noisey

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Brake pipe slightly corroded Pipes into union (3.6.B.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part Fitted incorrectly (3.6.B.4a)

Offside Headlamp aim too low Adjuster doesn't seem to work. (1.8)

Central Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust Noisey

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Brake pipe slightly corroded Pipes into union (3.6.B.2c)

Front Brake pad(s) wearing thin 70% worn (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear brake back plate corroded

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

hand brake needs adjustment

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

hand brake needs adjustment

Engine covers fitted obscuring some components in the engine bay

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Under-trays fitted obscuring some underside components

offside rear tyre inner edge scrubbed

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Engine covers fitted obscuring some components in the engine bay

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

offside rear tyre inner edge scrubbed

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

both front tyres have the inside edges scrubbed

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both front tyres have the inside edges scrubbed

EXHAUST MINOR LEAK AT FRONT JOINT

FRONT BRAKE PADS LOW

OFFSIDE AND NEARSIDE REAR ANTI ROLL BAR LINKAGES HAVS SLIGHT PLAY

OFFSIDE AND NEARSIDE REAR SHOCKABSORBERS SLIGHTLY WET

OFFSIDE REAR TYRE CLOSE TO LEGAL LIMIT

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Registration plate lamp not working (1.1.5c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)