2007 Mazda 6

Exhaust mounting defective Rear exhaust mounting has corroded away from the exhaust system (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened Heavily corroded (5.3.3 (b) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Various corrosion to under side of vehicle floor and inner sills areas (6.2.2 (d) (i))

Nearside Rear Lower Suspension arm corroded but not seriously weakened Heavily corroded (5.3.3 (b) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened Heavily corroded (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened Heavily corroded (5.3.3 (b) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt Split (5.3.4 (b) (ii))

Exhaust mounting defective Rear exhaust mounting has corroded away from the exhaust system (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened Heavily corroded (5.3.3 (b) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Various corrosion to under side of vehicle floor and inner sills areas (6.2.2 (d) (i))

Items removed from driver's view prior to test ()

Nearside Rear Lower Suspension arm corroded but not seriously weakened Heavily corroded (5.3.3 (b) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened Heavily corroded (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened Heavily corroded (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Axle swivel pins and bushes swivel pin and/or bush slightly worn both rear (5.1.2 (b) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

all suspension components heavily corroded

floor pan corroded

front and rear sub frames heavily corroded

rear exhaust bracket detatched

Covers/undertrays fitted

Front discs poor/corroded

Front tyres starting to get low

Slight play O/S/F inner rack end

Underside corroded

Nearside Rear Anti-roll bar has excessive play in a pin/bush d bush (2.4.G.2)

Offside Rear Anti-roll bar has excessive play in a pin/bush d bush (2.4.G.2)

Covers/undertrays fitted

Front discs poor/corroded

Front tyres starting to get low

Slight play O/S/F inner rack end

Underside corroded

Nearside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Tyre worn close to the legal limit Both front (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Exhaust system corroded

N/S/R tyre wall cut but not to cords

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Unable to visually see front and rear pads

Under-trays fitted obscuring some underside components

Nearside Headlamp aim too low (1.8)

Exhaust system corroded

N/S/R tyre wall cut but not to cords

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Unable to visually see front and rear pads

Under-trays fitted obscuring some underside components

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)