2008 Peugeot 107

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

General Underbody Corrosion

Rear Inner Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))

Front Tyre worn close to legal limit/worn on edge Both sides (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre worn close to legal limit/worn on edge BOTH FRONT (5.2.3 (e))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Vehicle structure inadequately repaired such that structural rigidity is significantly reduced axle mounting (6.1.1 (d) (i))

Nearside Vehicle structure inadequately repaired such that structural rigidity is significantly reduced inner sill front to rear (6.1.1 (d) (i))

Nearside Vehicle structure inadequately repaired such that structural rigidity is significantly reduced outer sill front to rear (6.1.1 (d) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Vehicle structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Brake hose has slight corrosion to ferrule All ferrules corroded (1.1.12 (f) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front bushes perished (5.3.4 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheel arch corroded and holed (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch corroded and holed (5.3.6 (a) (i))

Brake hose has slight corrosion to ferrule All ferrules corroded (1.1.12 (f) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front bushes perished (5.3.4 (a) (i))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush worn (5.3.4 (a) (i))

Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill near seat belt mounting (6.2.2 (d) (i))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush worn (5.3.4 (a) (i))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill n/s/rear sub frame mounting (5.3.6 (a) (i))

Exhaust silencer slightly loose rear mounting modified (8.1.1 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Exhaust silencer slightly loose rear mounting modified (8.1.1 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

o/s/r wheel bearing noisy

repair made to exhaust back mounting

surface corrosion on n/s/sill

Nearside Rear Brake pipe excessively corroded to flex (3.6.B.2c)

Offside Rear Brake pipe excessively corroded to flex (3.6.B.2c)

o/s/r wheel bearing noisy

repair made to exhaust back mounting

surface corrosion on n/s/sill

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear tyre sidewall perished

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear tyre sidewall perished

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear tyre sidewall perished

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear tyre sidewall perished

engine covers and undertrays fitted

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

engine covers and undertrays fitted