2008 Mazda 6

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps both not lighting plate (4.7.1 (b) (ii))

Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users (8.2.2.2 (c)) DANGEROUS

Offside Rear Sub-frame likely to become detached (5.3.3 (a) (ii)) DANGEROUS

Offside Rear Sub-frame likely to become detached (5.3.3 (a) (ii)) DANGEROUS

Integral body structure is corroded but structural rigidity is not significantly reduced Front & Rear (6.1.1 (c) (i))

Subframe mounting prescribed area is corroded but not considered excessive Front & Rear (5.3.6 (a) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged (5.2.3 (d) (ii))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Fuel Pipe/s corroded ()

Rear Inner Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Front Inner Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Headlamp reflector slightly defective slightly reduced light output (4.1.1 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

rear heat shield insecure

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp reflector slightly defective slightly reduced light output (4.1.1 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

rear heat shield insecure

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Surface corrosion to rear suspension components and mounting areas.

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Headlamp aim too high (4.1.2 (a))

Surface corrosion to rear suspension components and mounting areas.

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

surface corrosion to all areas

Nearside Front child seat fitted, unable to fully inspect adult belt

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear sub-frame, suspension components & body slightly corroded

parking brake only just met the minimum efficiency requirement

under trays fitted & obscuring inspection of some areas

Parking brake lever has little reserve travel (3.1.6b)