2008 Yamaha Yzf

Drive chain slightly tight (6.1.7 (k) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust slightly loose (6.1.2 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement shock absorber linkage bush rusty advise further checks (5.3.4 (a) (i))

Drive chain slightly tight (6.1.7 (k) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust slightly loose (6.1.2 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement shock absorber linkage bush rusty advise further checks (5.3.4 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front All direction indicators not working (4.4.1 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake excessively binding (1.2.1 (f))

Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear suspension bush has slight free play lower (2.4.A2a(i))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii)) DANGEROUS

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear suspension bush has slight free play lower (2.4.A2a(i))

Nearside Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bearing has excessive free play rear linkage bearings (2.4.A2a(i))

Steering movement excessively stiff with the wheel raised (2.2.1b)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Drive chain excessively tight (6.2.1d)

Drive chain sprocket carrier worn to excess (6.2.1e)

Drive chain worn to excess seized (6.2.1e)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Offside Front Fairings insecure and likely to impede the steering fairings insecure (2.1.2e)

Offside Rear Footrest missing (6.2.1a)

Rear reflector on motorcycle missing (1.4.1)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Brake pedal is positioned so that the brake cannot be readily applied fairings catching pedal (3.1.3c) DANGEROUS

Exhaust noisy (7.1.2)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

chain has tight links in it