2009 Peugeot 107

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive o/s and n/s inner, outer sills (5.3.6 (a) (i))

exhaust has part corroded

Brake hose has slight corrosion to ferrule front and rear (1.1.12 (f) (i))

Front subframe and associated components (arms,struts/springs,antiroll bar ect corroded)

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear beam axle and associated components corroded

exhaust has part corroded

Exhaust mounting defective front support bracket broken (6.1.2 (a))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Tyre obviously under inflated (5.2.3 (l))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Macpherson strut corroded but not seriously weakened very close to limit (5.3.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust mounting defective support bracket corroded close to limit (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened Both sides (1.1.14 (a) (ii))

Offside Front Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Brake pipe leaking on an air braking system (1.1.11 (b) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened Both sides (1.1.14 (a) (ii))

Offside Front Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

All direction indicators not working (4.4.1 (a) (ii))

Front Exhaust system insecure mount corroded and seperated from ehaust (6.1.2 (a))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Rear Service brake excessively binding (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside front brake binding (3.7.B.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside front brake binding (3.7.B.1)

Front Brake pad(s) modified but not seriously weakened (3.5.1n)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Inner Rear Brake pipe excessively corroded (3.6.B.2c)

Offside rear brake binding (3.7.B.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)