2009 Yamaha Yn 50 F Neos

Engine Management Light on

Front Shock absorber has negligible damping effect Both front neglect damping effect & fork seals perished (5.3.2 (b))

Headlamp aim too low (4.1.2 (a))

Headlamp insecure (4.1.1 (c))

Engine Management Light on

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Front Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside mirror missing

center stand not working

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Registration plate does not conform to the specified requirements (0.1 (d))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) DANGEROUS

Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) DANGEROUS

Front Shock absorber has a light misting of oil (5.3.2 (b))

Motorcycle structure is fractured but structural rigidity is not significantly reduced Fairing panels damaged but cable tied (6.1.1 (a) (i))

Rear Position lamp damaged but function not impaired (4.2.1 (c) (ii))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front suspension assembly slightly bent (2.3.1)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Handlebar deformed (2.1.1b)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Front suspension assembly slightly bent (2.3.1)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Front mudguard insecure (2.3.7)

Rear Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear reflector on motorcycle missing (1.4.1)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement slightly stiff (2.2.1a)