2014 Fiat Punto

Front Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive axle (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Brake cable guide defective and affecting operation (1.1.15 (d))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Brake cable guide defective and affecting operation (1.1.15 (d))

Offside Headlamp aim unable to be tested (4.1.2 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content at idle exceeds default limits co 0.59 (8.2.1.2 (b))

Exhaust has a major leak of exhaust gases front flexi pipe (6.1.2 (a))

Exhaust system insecure rear box outer skin (6.1.2 (a))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Registration plate lamp likely to become detached (4.7.1 (c) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Central Stop lamp(s) light intensity obviously reduced (4.3.3 (a) (i))

Central Stop lamp(s) light intensity obviously reduced (4.3.3 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front day time running light inoperative

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

both front discs lipped

Nearside Front Headlamp aim too high (1.8)

Offside Rear Headlamp aim too high and too far to the right. (1.8)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Nail in tyre ()

Vehicles internal headlight adjuster altered to recheck lights ()

both front discs lipped

unable to print refusal to test certificate no oil visible in dipstick