2002 Aprilia RS125R

Horn not working (7.7 (a))

Rear Position lamp not working (4.2.1 (a))

LIGHTS HAVE BEEN MASKED OVER AT TIME OF TEST, MACHINE CAN ONLY BE USED DURING DAYLIGHT HOURS AND NOT TO BE USED AT TIMES OF SERIOUSLY REDUCED VISIBILITY.

Rear Drive chain sprocket slightly worn (6.2.1e)

rear brake pedal travel needs attention

rear disc rusty

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort (3.3.A1c)

Brake lever is short but brake can still be readily applied (3.1.3c)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

battery output low which affects lights at low revs

rear disc rusty

Drive chain excessively tight (6.2.1d)

Front Headlamp aim too low (1.6)

Offside Brake pedal mounting cracked . (3.1.2c)

Exhaust slightly deteriorated (7.1.1a)

Front Brake hose slightly chafed (3.2.B3a)

Nearside Fairings insecure but not likely to impede the steering (2.1.2e)

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Offside Fairings insecure but not likely to impede the steering (2.1.2e)

front mud guard missing.

slight play in lower rear suspension linkage.

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear suspension bush has slight free play (2.4.A2a(i))

both front side panel fairings slightly insercure.

front mud guard missing.

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Drive chain sprocket worn to excess (6.2.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Brake pedal pivots excessively worn (3.1.3a)

Offside Rear Brake pedal mounting cracked . (3.1.2c)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear suspension bush has slight free play (2.4.A2a(i))

both front side panel fairings slightly insercure.

front mud guard missing.

Front Front wheel bearings are excessively rough (2.3.5b)

Front Headlamp aim too low (1.6)

Nearside Front Handlebar mounting clamp bolt loose (2.1.1a)

Offside Front Handlebar mounting clamp bolt loose (2.1.1a)

Offside Rear Direction indicator not working (1.5.1c)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Nearside Front Fairings insecure but not likely to impede the steering (2.1.2e)

Offside Front Fairings insecure but not likely to impede the steering (2.1.2e)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Drive chain sprocket slightly worn (6.2.1e)

slight play in rear lower suspention linkage.