2003 Mazda 6

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

all 4 wheel arches slightly corroded

Nearside Front outer sill has corrosion but not within a prescribed area

Offside Front Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Offside Front outer sill slightly corroded

both rear tyres worn out of shape

o/s/f wheels has slight bind

slight corrosion on o/s/f outer sill

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Registration plate lamp not working (1.1.C.1d)

both rear tyres worn out of shape

o/s/f wheels has slight bind

slight corrosion on o/s/f outer sill

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Nearside Front Body has slight corrosion (6.1.B.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Body has slight corrosion (6.1.B.2)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

clutch heavy

Front registration plate deteriorated (6.3.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

clutch heavy

nearside front wheel bearing noisy when rotated

Parking brake lever has little reserve travel (3.1.6b)

nearside rear tyre slightly out of shape

offside rear tyre worn on inner edge

Brakes imbalanced across an axle (3.7.B.5b)

Parking brake lever has little reserve travel (3.1.6b)

nearside rear tyre slightly out of shape

offside rear tyre worn on inner edge

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Front Brake pad(s) wearing thin (3.5.1g)

Nearside rear tyre has deep cut in not enough to reach the cords

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)