2003 Mazda 6

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Nail in tyre ()

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Body has slight corrosion (6.1.B.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

BOTH SIDE FRONT WIPER RECOMMEND REPLACEMENT

NEAR SIDE FRONT WHEEL HAS SLIGHT MOVEMENT

NEAR SIDE REAR WHEEL HAS SLIGHT BINDING

Nearside Front brake back plate corroded

Nearside Front wiper blade insecure

Rear Brake hose has slight corrosion to ferrules both (3.6.B.4e)

slight corrosion nearside front sill

Nearside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' sun visor (8.3.1b)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front brake back plate corroded

Nearside Front wiper blade insecure

Rear Brake hose has slight corrosion to ferrules both (3.6.B.4e)

slight corrosion nearside front sill

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside rear brake binding (3.7.B.1) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

nearside and offside outer sills plastic side trims fitted unable to test corrosion

offside and nearside inner sills corroded

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Front brake application uneven,just within limits

Front brake disc inner faces in poor condition

Front inner pads look low

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust system not adequately supported (7.1.1)