2003 Nissan Pickup

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mounting (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material various pipes (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive n/s and o/s inner and outer sills and floor area (7.1.1 (a) (i))

Suspension arm corroded but not seriously weakened both front arms (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material various pipes (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened both front arms (5.3.3 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake insecure hand brake cable (1.1.21 (c))

Front Service brake excessively binding (1.2.1 (f))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting (5.3.6 (a) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension arm corroded but not seriously weakened all 4 front arms (5.3.3 (b) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

can not fully check all components underneath due to under seal sprayed on everything underneath

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive inner and outer sills and floor area (7.1.1 (a) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner and outer sills and floor area (7.1.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear mounting various holes (5.3.6 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear mountings various holes (5.3.6 (a) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive inner and outer sills and floor area (7.1.1 (a) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner and outer sills and floor area (7.1.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Central Suspension component mounting prescribed area is corroded but not considered excessive x member holed (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive and holed x member close to body mounting (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Emissions not tested (7.3.A.1)

Rear Brake pipe excessively corroded x6 (3.6.B.2c)

Central Suspension component mounting prescribed area is corroded but not considered excessive x member holed (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive and holed x member close to body mounting (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Advise chassis corroded

Front Discs corroded

Nearside Rear Brake pipe slightly corroded to load valve (3.6.B.2c)

Offside Rear Brake pipe slightly corroded Load valve (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded Across axle (3.6.B.2c)

Offside Rear Brake pipe excessively corroded Across axle (3.6.B.2c)

Offside Rear Rear position lamp(s) not working Side light (1.1.A.3b)

Advise chassis corroded

Front Discs corroded

Nearside Rear Brake pipe slightly corroded to load valve (3.6.B.2c)

Offside Rear Brake pipe slightly corroded Load valve (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake pipe slightly corroded x3 (3.6.B.2c)

small fuel leak by tank

Advise corrosion underneath!

Front discs corroded!

Fuel leak!

Nearside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

cut to nearside rear tyre not to cord

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp aim too low (1.8)

cut to nearside rear tyre not to cord

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

centre high level brake light not wired up

corrosion at rear silencer

Offside Rear An item not tested (Manual)

Offside Rear Brake lever has restricted free movement (3.5.1k)

brake disc excessively pitted (3.5.1h)

o/s rear brake binding

Front brake disc excessively pitted (3.5.1h)

Offside Rear An item not tested (Manual)

Offside Rear Brake lever has restricted free movement (3.5.1k)

Front Brake pad(s) wearing thin (3.5.1g)