2003 Nissan Terrano

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Registration plate lamp insecure (4.7.1 (c) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Steering box has slight free play detected at steering wheel (2.3 (a) (i))

chassis and all underside components corroded

front crossmember corroded

offside rear brake back plate ring corroded and insecure

Nearside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Registration plate lamp insecure (4.7.1 (c) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Steering box has slight free play detected at steering wheel (2.3 (a) (i))

chassis and all underside components corroded

front crossmember corroded

offside rear brake back plate ring corroded and insecure

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive suspension (5.3.6 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

corrosion to o/s/r brake backplate

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength diff mounting arm n/s mount (5.3.6 (a) (i))

Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength trailing arm rear mount x 2 (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (inner wheel arch) (5.3.6 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring seat x 2 (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis x 2 (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength trailing arm rear mount (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength trailing arm front mount (5.3.6 (a) (i))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive suspension (5.3.6 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

corrosion to o/s/r brake backplate

Corrosion to O/S/R brake backplate

Corrosion to front chassis

Corrosion to front suspension

Corrosion to rear chassis

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper spring seat/mount (5.3.6 (a) (i))

Nearside Windscreen washer not working (3.5 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower arm rear bush chassis mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper spring seat/mount (5.3.6 (a) (i))

Offside Windscreen washer not working (3.5 (a))

Corrosion to O/S/R brake backplate

Corrosion to front chassis

Corrosion to front suspension

Corrosion to rear chassis

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Upper Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))

Brake fluid significantly below minimum mark (1.1.10 (d) (ii))

Brake pedal has insufficient reserve travel (1.1.2 (a))

Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arm rear mounting (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Windscreen washer not working (3.5 (a))

Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arm rear mounting (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))

Offside Front Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Windscreen washer not working (3.5 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake pipe leaking on a hydraulic braking system n/s on rear axle (1.1.11 (b) (ii)) DANGEROUS

Offside Front Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

Front Upper Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))

Exhaust has a major leak of exhaust gases tail pipe (6.1.2 (a))

Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arm rear mounting points (5.3.6 (a) (i))

Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arm rear mounting points (5.3.6 (a) (i))

Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wishbone mounting washers (5.3.6 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Corrosion to n/s/f & o/s/f suspension lower arm rear mountings

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

n/s/f tyre perished

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member next to n/s/r axle tie arm mount (5.3.6 (a) (i))

Corrosion to n/s/f & o/s/f suspension lower arm rear mountings

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

n/s/f tyre perished

Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Dampness near fuel tank but no leaks found

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust system not adequately supported (7.1.1)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside front brake binding (3.7.B.1)

Dampness near fuel tank but no leaks found

Nearside Rear Brake pipe inadequately clipped (3.6.B.1)

Offside Rear Brake pipe inadequately clipped (3.6.B.1)

corrosion to front brake hose ferrules

corrosion to front brake hose ferrules

Front Upper Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Upper Coil spring mounting corroded but not seriously weakened (2.4.C.3c)

Nearside Front wheel bearing has slight play (2.5.A.3c)

all suspension areas corroded

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear An item not tested (Manual)

Rear registration plate obscured (6.3.1d)

front brake application uneven (3.7.B.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

all suspension areas corroded

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Registration plate lamp insecure (1.1.C.1c)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Vehicle structure has slight corrosion (6.1.A.1)

both front tyres uneven wear

nearside front tyre wearing outside edge

under side of vehicle rusty

Offside Front brake disc excessively pitted (3.5.1h)