MOT Status
ExpiredMileage
92,308 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
brake pedal feels a little spongy
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wing/boot floor (2.4.A.3)
Offside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Statutory seat belt missing (5.1.1)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b)
Front front brake application uneven (3.7.B.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
front brake binding (3.7.B.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside front brake binding (3.7.B.1)
o/s + n/s front tyres (centre treads) in poor condition
o/s rear tyre inner edge worn thin
rear brake pads wearing thin
rear brake pads wearing thin
o/s + n/s front tyres (centre treads) in poor condition
o/s rear tyre inner edge worn thin
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
n/s front wiper blade starting to split
slight wear front brake discs but not affecting performance
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YW02 BRV is a 2002 Mazda 6 in Silver with a 1,798cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 2002 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 78,488 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying YW02 BRV, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 24 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YW02 BRV?
You can check the full history of YW02 BRV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YW02 BRV registered?
YW02 BRV is a 2002 Mazda 6, first registered on 2 August 2002.
Is YW02 BRV safe to buy?
The MOT history for YW02 BRV shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YW02 BRV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YW02 BRV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.