1982 Land Rover 109

Brake pipe corroded, covered in grease or other material coated with underseal not allowing full check (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre slightly damaged/cracking or perishing all four tyres cracking (5.2.3 (d) (ii))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material coated with underseal not allowing full check (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre slightly damaged/cracking or perishing all four tyres cracking (5.2.3 (d) (ii))

Brake pipe corroded, covered in grease or other material all steel pipes coated undersealednot allowing full check (1.1.11 (c))

Nearside Tyre slightly damaged/cracking or perishing both front and rear tyres cracking /perishing (5.2.3 (d) (ii))

chassis coated in underseal

Brake pipe corroded, covered in grease or other material all steel brake pipes coated (1.1.11 (c))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis rail (6.1.1 (c) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember outrigger (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced CHASSIS RAIL NEAR FUEL TANK (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis rail near front spring mount (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember outrigger (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre slightly damaged/cracking or perishing ALL FOUR TYRES CRACKING (5.2.3 (d) (ii))

Lower Vehicle structure is corroded but structural rigidity is not significantly reduced general surface rust (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

emissions tested second time then passed

Nearside Front Brake pipe corroded, covered in grease or other material flexi to cylinder (1.1.11 (c))

Rear cross member corroded

Tyre slightly damaged/cracking or perishing all four tyres (5.2.3 (d) (ii))

both front hub seals slight leaks

undercarriage rusty

2 metal brake pipes on 4way on o/s front chassis are corroding

Nearside rear brake binding (3.7.B.1)

Hazard warning lamps inoperative (1.4.B.1b)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside front brake binding (3.7.B.1)

Offside Front Suspension spring mounting prescribed area is excessively corroded rigger (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside rear brake binding (3.7.B.1)

Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember (6.6.6)

Registration plate lamp not working (1.1.C.1d)

2 metal brake pipes on 4way on o/s front chassis are corroding

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Indicator tell tale inoperative (1.4.A.2a)

Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt (5.2.2a)

Offside Front Seat belt insecurely fixed to the vehicles structure (5.2.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Rear Rear fog lamp not working (1.3.2b)

Rear Registration plate lamp not working (1.1.5c)

Rear Stop lamp not working (1.2.1b)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

rear exhaust pipe holed corroded.rear number plate slight damage to backing.

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Rear Exhaust mounting missing (7.1.1b)

Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Registration plate lamp not working (1.1.5c)