2002 Citroen Berlingo

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/arch (6.1.B.2)

Nearside Rear Subframe mounting prescribed area is excessively corroded chassis inner arch (2.4.A.3)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor (6.1.B.2)

Offside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/arch (6.1.B.2)

Offside Rear Subframe mounting prescribed area is excessively corroded inner arch (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Registration plate lamp not fitted (1.1.C.1b)

Rear Subframe mounting prescribed area is severely distorted rear cross member/rear pannel (2.4.A.3)

Rear Towbar component excessively corroded (6.6.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar linkage fractured (2.4.G.1)

Offside Stop lamp not working (1.2.1b)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Sub-frame corroded and seriously weakened (2.4.G.1)

Offside Front constant velocity joint is insecure (2.5.C.1b)

Rear Stop lamp not working (1.2.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

front subframe corroded

n/s/f tyre cracking on side wall

n/s/f wheel rim damage & rusting

o/s/f tyre cracking in treads

underbody surface corrosion

underbody welding undersealed & seam sealed

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear wheel bearing rough when rotated (2.6.1)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

front subframe corroded

Nearside Front Upper Coil spring mounting corroded but not seriously weakened (2.4.C.3c)

offside front front shock absorber slightly worn

under side rusted in places oil spray

Brake load sensing valve inoperative (3.6.E.3)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

rear brake recording little or no effort (3.7.B.5a)

Nearside Front Upper Coil spring mounting corroded but not seriously weakened (2.4.C.3c)

offside front front shock absorber slightly worn

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

offside front coil spring rusty

Offside Rear Axle beam has excessive vertical movement between stub axle and axle beam (2.5.A.1a)

offside front coil spring rusty

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Outer Front constant velocity joint is insecure (2.5.C.1b)

Offside Stop lamp not working (1.2.1b)

Brakes imbalanced across an axle (3.7.B.5b)