2002 Citroen Berlingo

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Brake load sensing valve seized (3.6.E.3)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Outer Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Obligatory mirror insecure (8.1.1)

Offside Outer Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

spare wheel carrier not secure

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front coil spring fractured (2.4.C.1a)

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

travel park brake near to limit

Centre Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Stop lamp not working (1.2.1b)

Rear Exhaust system not adequately supported (7.1.1)

Centre Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Rear Axle beam has excessive vertical movement between stub axle and axle beam (2.5.A.1a)

Nearside front brake binding (3.7.B.1)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

nearside rear tyre wear on inside edge

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Stop lamp not working (1.2.1b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)