2002 Chrysler-jeep Grand Voyager

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Shock absorbers damaged to the extent that it does not function (5.3.2 (b))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Rear Shock absorbers damaged to the extent that it does not function (5.3.2 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Leaf spring has slight wear in an anchor pin and/or bush (5.3.4 (a) (i))

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Leaf spring has slight wear in an anchor pin and/or bush (5.3.4 (a) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Steering pivot point has excessive play rack end (2.2.B.1g)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

coolant leak

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Stop lamp not working high level (1.2.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

coolant leak

Battery insecure (1.9.1)

Nearside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)

Offside Front Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Stop lamp not working high level (1.2.1b)

Nearside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Offside Front Brake hose excessively chafed (3.6.B.4d) DANGEROUS

Offside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Body has slight corrosion (6.1.B.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

Parking brake lever has little reserve travel (3.1.6b)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

coolant leak

front number plate has damage but can still be read

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear Rear wheel bearing has excessive play (2.6.2)

Registration plate lamp not working (1.1.C.1d)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Track rod end ball joint has slight play (2.2.B.1f)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too high (1.8)

Track rod end ball joint has slight play (2.2.B.1f)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Headlamp aim too low when the centre of the headlamp is above 850mm from the ground (1.6.B3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)