2006 Mazda 6

Body has slight corrosion under body (6.1.B.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Parking brake lever has little reserve travel (3.1.6b)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Wheel nut(s) missing All four wheels have one (4.2.A.1e)

Both rear light lens have damage

Nearside Rear Tyre has outer side wall damage.

Nearside Rear rear brake fluctuating, but not excessively (3.7.B.3)

Vehicle underside corroded in various areas.

Engine covers fitted obscuring some components in the engine bay

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Under-trays fitted obscuring some underside components

offside rear tyre badly perished

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Radius arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Lower Radius arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

rear tyres very badly perished

Nearside rear brake binding (3.7.B.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Hazard warning lamps inoperative (1.4.B.1b)

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front coil spring broken (2.4.C.1a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

front brake application uneven (3.7.B.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

n/s rear brake binding

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Slight bind at o/s/f brake

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Slight bind at o/s/f brake

Front Brake pad(s) wearing thin (3.5.1g)