2006 Mazda 6

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Front Shock absorbers has slight external damage to the casing (5.3.2 (b))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Headlamp aim too low (4.1.2 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Front Shock absorbers has slight external damage to the casing (5.3.2 (b))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Shock absorbers has slight external damage to the casing both (5.3.2 (b))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Anti-roll bar linkage corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Shock absorbers has slight external damage to the casing both (5.3.2 (b))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Position lamp not working (4.2.1 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Anti-roll bar linkage corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

o/s front wheel bearing slightly noisy not excessive at time of test

o/s rear tyre outer sidewall damaged but legal at time of test strongly suggest change to avoid possible blow out

Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front front brake binding (3.7.B.1)

Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nail in offside rear tyre

o/s front wheel bearing slightly noisy not excessive at time of test

o/s rear tyre outer sidewall damaged but legal at time of test strongly suggest change to to avoid possible blow out

rear exhaust mount not connected but exhaust still supported at time of test

unable to check n/s front wheel bearing correctly

o/s/r tyre sidewall damaged

rear exhust mounting adrift but exhaust still serported

slight noise from the o/s/f wheel bearing

Centre Stop lamp not working (1.2.1b)

o/s/r tyre sidewall damaged

rear exhust mounting adrift but exhaust still serported

o/s rear tyre outer wall damaged but legal at time of test

unable to see or check n/s o/s rear inner brake pads correctly with wheels fitted

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Obligatory mirror insecure (8.1.1)

nearside front tyre bald on edges

offside front tyre on limit on edges