2005 Kymco Zx

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Riders seat slightly loose (6.2.5 (a) (ii))

offside plastic slight damage

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Offside Rear Direction indicator insecure (4.4.1 (c) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

kick start slight play

Central Motorcycle structure slightly corroded (6.1.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension has slight corrosion alloy tubes (2.3.8)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear Tyre worn close to the legal limit (4.1.3(i))

Central Motorcycle structure slightly corroded (6.1.1a)

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension has slight corrosion alloy tubes (2.3.8)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear Tyre worn close to the legal limit (4.1.3(i))

Centre Rear Motorcycle structure slightly corroded (6.1.1a)

Front Tyre valve stem slightly damaged (4.1.2c)

Front Tyre worn close to the legal limit has small cuts on side wall (4.1.3(i))

Front suspension has slight corrosion fork tubes (2.3.8)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Front suspension assembly slightly corroded. (2.3.1)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

front brake pads maybe coming apart

Front suspension assembly slightly corroded. (2.3.1)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Stop lamp affected by the operation of another lamp (1.3.2)

front brake pads maybe coming apart

Front suspension has slight corrosion (2.3.8)

Front suspension has slight corrosion (2.3.8)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust mounting deteriorated. (7.1.1.c)

Front suspension assembly slightly corroded. (2.3.1)

Rear Rear position lamp obscured but not more than 50% (1.1.1d)

Exhaust mounting deteriorated. (7.1.1.c)

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front suspension assembly slightly corroded. (2.3.1)

Rear Rear position lamp obscured but not more than 50% (1.1.1d)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Exhaust slightly deteriorated (7.1.1a)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))