2005 Peugeot Boxer

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front suspension components corroded

Front suspension components corroded

chassis and leaf springs showing corrosion

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis next to cross member (6.2.2 (d) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis next to jacking point (6.2.2 (d) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front suspension components corroded

Front suspension components corroded

chassis and leaf springs showing corrosion

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Front inner arch has corrosion but not excessive

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Inner Cab steps in such a condition that it is likely to cause injury step/sill area excessively corroded and holed (6.2.8 (b))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Exhaust mounting defective (6.1.2 (a))

Nearside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch area (5.3.6 (a) (i))

exhaust in poor condition

Exhaust system insecure Rubber mounts broken (6.1.2 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step / sill (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Hole inner wheel arch (5.3.6 (a) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Exhaust first skin corroded

Nearside Front Brake pipe clips or supports missing, pipe adequately supported Pipe bracket partly corroded off chassis (1.1.11 (d) (i))

Nearside Front Tyre slightly damaged/cracking or perishing Cracks in tyre wall (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing Cracks in tyre wall (5.2.3 (d) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Inner sill corroded but not within 30cm of structural component

reverse light not working

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Inner sill corroded but not within 30cm of structural component

reverse light not working

Exhaust system not adequately supported (7.1.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear brake binding (3.7.B.1)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Rear fog lamp not working (1.3.2b)

n/s/r shock damp

n/s/r shock absorber damp

Nearside Headlamp aim too low (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp aim too low (1.8)

Offside Rear fog lamp not working (1.3.2b)

Offside Registration plate lamp not working (1.1.C.1d)

n/s/r shock absorber damp

Offside rear brake recording little or no effort (3.7.B.5a) DANGEROUS

rear brake application uneven (3.7.B.2) DANGEROUS

o/s/r brake slighty binding