2006 Fiat Panda

Driver's door cannot be opened from outside the vehicle (6.2.3 (a))

Headlamp light source and lamp not compatible led bulbs fitted (4.1.4 (c))

Emissions unable to be completed due to condition of exhaust (8.2.1.2 (d))

Exhaust system insecure broken at rear (6.1.2 (a))

Front Exhaust has a major leak of exhaust gases flex joint area (6.1.2 (a))

Nearside Rear Direction indicator adversely affected by the operation of another lamp when in use with position light (4.4.3 (b))

Nearside Rear Position lamp adversely affected by the operation of another lamp when in use with indicator (4.2.3 (c))

Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp when in use with position lights and indicators (4.3.3 (b))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Shock absorbers has an excessively worn bush top mounting bushes on both sides (5.3.2 (c))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear section of both outer sill areas (5.3.6 (a) (i))

Front Tyre worn close to legal limit/worn on edge NSF / OSF worn edges (5.2.3 (e))

Nearside Brake pipe corroded, covered in grease or other material front to rear at flexi (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material at flexi (1.1.11 (c))

Nearside Rear Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material at hub (1.1.11 (c))

Rear Tyre worn close to legal limit/worn on edge OSR / NSR 2,5 mm (5.2.3 (e))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Body panel damaged and likely to cause injury mirror , sharp edge (6.2.1 (a) (i))

Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Front Tyre worn close to legal limit/worn on edge NSF / OSF worn edges (5.2.3 (e))

Nearside Brake pipe corroded, covered in grease or other material front to rear at flexi (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material at flexi (1.1.11 (c))

Nearside Rear Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material at hub (1.1.11 (c))

Rear Tyre worn close to legal limit/worn on edge OSR / NSR 2,5 mm (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front registration plate deteriorated (6.3.1d)

Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

Rear registration plate deteriorated (6.3.1d)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

back box corroded

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)