2006 Mazda 3

all under the body covered with under seal , obscuring some components

Both side sill panel cover fitted

Front Brake pipe corroded, covered in grease or other material Both side (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Both side sill panel cover fitted

Front Brake pipe corroded, covered in grease or other material Both side (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Jacking Point (6.2.2 (d) (i))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps x2 (4.7.1 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Air con condenser very deteriorated

Clutch slave cylinder leaking

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear subframe and suspension arms very corroded

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

nearside and offside inner and outer sills very corroded outer sills have covers fitted so unable to inspect full condition of outer sills

Central Exhaust mounting defective (6.1.2 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear suspension/subframe corroded

Vehicle has underbody corrosion

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Central Exhaust mounting defective (6.1.2 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear suspension/subframe corroded

Vehicle has underbody corrosion

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Central Exhaust mounting defective (6.1.2 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Central Exhaust mounting defective (6.1.2 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust heat shields loose

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Outer Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Exhaust heat shields loose

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge Both edges worn (5.2.3 (e))

Offside Front Nail in tyre ()

Offside Front Tyre worn close to legal limit/worn on edge Inner edge bald (5.2.3 (e))

Offside Front Valve stem slightly damaged (5.2.3 (j))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement both sides rear bush (2.4.G.2)

Nearside Rear coil spring broken (2.4.C.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Exhaust has a minor leak of exhaust gases flexi section damaged (7.1.2)

Under body surface corrosion!

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)