2007 Fiat Doblo

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Central Exhaust has a major leak of exhaust gases Clamp loose (6.1.2 (a))

Exhaust emissions exceed manufacturer's specified limit Plate value 0.51 (8.2.2.2 (a))

Exhaust system insecure (6.1.2 (a))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Clip shaft side (6.1.7 (g) (ii))

Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 25% (1.2.1 (b) (i))

Fuel cap/sealing device ineffective Not fitted (6.1.3 (b) (i))

Nearside Front Odd steel wheel fitted

Nearside Front Tyre worn close to legal limit/worn on edge Smooth inside edge Worn close to cords (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge Smooth inside edge Worn close to cords (5.2.3 (e))

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

o/s and n/s front strut tops tight

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened Both sides (1.1.14 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

FRONT BRAKE DISCS VERY POOR CONDITION

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

FRONT BRAKE DISCS VERY POOR CONDITION

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

n/s windscreen washer jet missing

Rear Direction indicators slightly discoloured (1.4.A.2f)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front front brake juddering severely (3.7.A.2b)

Offside Front front brake juddering severely (3.7.A.2b)

Rear Direction indicators slightly discoloured (1.4.A.2f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

20% inbalance front brakes

front brake discs worn thin