2008 Ford S-max

Clean Emissions

Rear Tyre worn close to legal limit/worn on edge both worn on the inner edge (5.2.3 (e))

Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Front Road wheel fixing missing wheel nut (5.2.1 (a) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Clean Emissions

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm (5.3.4 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both worn on the inner edge (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm mounting bush (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm mounting bush (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear axle corroded

rear outer sills corroded

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear axle corroded

rear outer sills corroded

Offside Rear Stop lamp(s) all not working (4.3.1 (a) (iii))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

centre exhaust heat shield loose

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

centre exhaust heat shield loose

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge around 3mm (5.2.3 (e))

both front tyres worn on edges

Nearside Play in steering rack inner joint(s)

both front tyres wearing on inner edges

Nearside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Trailing arm rubber bush deteriorated but not resulting in excessive movement front of both rear (2.4.G.2)

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)