2010 Yamaha Wr 125 X

Chain guard missing ()

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Offside Front Direction indicator light intensity reduced (4.4.3 (a))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Outer Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

n/s handlebar grip slightly loose but secure.

rear brake fluid level low.

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Chain guard missing ()

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Offside Front Direction indicator light intensity reduced (4.4.3 (a))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Outer Brake pad(s) close to minimum limit (1.1.13 (a))

rear brake fluid level low.

Headlamp aim unable to be tested engine oil level too low to run engine (4.1.2 (b))

Headlamp not working on main beam cannot be tested - engine oil level too low to run engine (4.1.1 (a) (ii))

Offside Front Direction indicator with a multiple light source more than 1/2 not functioning LED's failed (4.4.1 (a) (ii))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Stop lamp emits other than a steady red light flickering and working intermittently when applying brake lever (4.3.3 (a) (ii))

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Offside Handlebar grip insecure to handlebar entire throttle housing assembly (2.2.1 (d) (ii)) DANGEROUS

Chain guard missing ()

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Wheel alignment slightly misaligned (2.4 (a))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Indicator switch insecure (4.4.2 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Upper Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Wheel alignment slightly misaligned (2.4 (a))

Steering headbearing has slight free play (2.2.2 (f) (i))

exhaust system cannot be tested - engine oil level too low to run engine

fuel system cannot be tested - engine oil level too low to run engine

Chain guard missing ()

Offside Front Direction indicator with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Upper Steering headbearing has slight free play (2.2.2 (f) (i))

Chain guard missing ()

Front Position lamp not working (4.2.1 (a))

Front Position lamp not working (4.2.1 (a))

Offside Front Direction indicator with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Upper Steering headbearing has slight free play (2.2.2 (f) (i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Headlamp aim too low (1.6)

Rear reflector on motorcycle missing (1.4.1)