2003 Fiat Ducato

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Front and rear mounts (5.3.6 (a) (i))

Nearside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced Chassis (6.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear cross member near spring mount (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Rear mount (5.3.6 (a) (i))

Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced Chassis leg (6.1.1 (a) (i))

Offside Rear Position lamp likely to become detached (4.2.1 (c) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear cross member near rear spring mount (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Brake pedal wearing smooth (1.1.2 (c))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Brake cable has wires broken but is not significantly weakened (3.5.1b)

Oil leak ()

extensive corrosion

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp aim too low (1.8)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Suspension spring mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement (2.4.B.2)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Suspension spring mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

corrosion nearside and offside front next to front crossmember

engine oil leak

slight wear nearside and offside track rod ends

strands broken on handbrake cable

various holes and corrosion not within prescribed areas

Brake load sensing valve seized (3.6.E.3)

Brakes imbalanced across an axle nearside weakest (3.7.B.5b)

Nearside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim too high (1.8)

Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

corrosion nearside and offside front next to front crossmember

engine oil leak

slight wear nearside and offside track rod ends

strands broken on handbrake cable

various holes and corrosion not within prescribed areas

Fuel system component leaking engine area (7.2.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Nearside Outer Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Registration plate lamp not working (1.1.C.1d)

Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Brake pipe slightly corroded (3.6.B.2c)

Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive (3.1.9)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Vehicle structure has slight corrosion (6.1.A.1)

inner sills holed

Brake pipe slightly corroded (3.6.B.2c)

Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) incorrect colour (1.1.A.3e)

Brake pipe slightly corroded (3.6.B.2c)

Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

Nearside Front Anti-roll bar linkage fractured (2.4.G.1)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

Nearside Front Direction indicators slightly discoloured (1.4.A.2f)

Horn not working (1.6.2a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Direction indicators slightly discoloured (1.4.A.2f)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Rear wheel bearing has slight play (2.6.2)