2004 Mazda MX-5

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis arm (6.2.2 (d) (i))

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis arm (6.2.2 (d) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (close to seat mounting) (6.2.2 (d) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (close to seat mounting) (6.2.2 (d) (i))

Offside Front Suspension arm attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material greased (1.1.11 (c))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Central Rear Exhaust has a major leak of exhaust gases pipe and box (6.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))

Nearside Front Inner Subframe mounting prescribed area is corroded but not considered excessive wing (2.4.A.3)

Offside Front Inner Subframe mounting prescribed area is corroded but not considered excessive wing (2.4.A.3)

Nearside Headlamp aim too high (1.8)

Nearside Front front brake binding (3.7.B.1)

Offside Headlamp aim too high (1.8)

Nearside Front Inner Subframe mounting prescribed area is corroded but not considered excessive wing (2.4.A.3)

Offside Front Inner Subframe mounting prescribed area is corroded but not considered excessive wing (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Items removed from drivers view

front brake pads low

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside rear brake binding (3.7.B.1)

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside rear brake binding (3.7.B.1)

under tray fitted

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

front brake pads are getting thin.

rear tyres have only 2mm tread left in places.

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)