MOT Status
ExpiredMileage
105,285 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Prescribed areas slightly corroded
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Prescribed areas slightly corroded
Central Exhaust mounting defective (6.1.2 (a))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp aim too high (4.1.2 (a))
Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Tyre slightly damaged/cracking or perishing Outer edge (5.2.3 (d) (ii))
Rear Exhaust heat shield insecure
Rear Exhaust mounting defective Mount broken (6.1.2 (a))
Exhaust system insecure middle brackets (6.1.2 (a))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Obligatory mirror seriously damaged, affecting the rear view door mirror (3.3 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brake lever has insufficient reserve travel (1.1.2 (a))
Nearside Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii)) DANGEROUS
Offside Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii)) DANGEROUS
Nearside Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Front brake discs
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Side repeater not working (1.4.A.2c)
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill all along (5.2.6)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front front brake binding (3.7.B.1)
Offside Seat belt anchorage prescribed area is excessively corroded outer sill holed and corroded (5.2.6)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
Front brake discs
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front front brake fluctuating, but not excessively (3.7.B.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Engine covers fitted obscuring some components in the engine bay
Nearside front tyre 3mm
Offside front tyre 3mm
Under-trays fitted obscuring some underside components
Underside of vehicle corroded
Exhaust system not adequately supported (7.1.1)
Nearside Front Headlamp aim too low (1.8)
Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside front brake binding (3.7.B.1)
Offside Front Headlamp aim too low (1.8)
Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Statutory seat belt missing (5.1.1)
Engine covers fitted obscuring some components in the engine bay
Nearside front tyre 3mm
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside front tyre 3mm
Under-trays fitted obscuring some underside components
Underside of vehicle corroded
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp aim too high (1.8)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
o/s wiperblade split
o/s wiperblade split
Offside Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YY05 BLV is a 2005 Mazda 6 in Blue with a 1,798cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 56.5%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying YY05 BLV, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YY05 BLV?
You can check the full history of YY05 BLV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YY05 BLV registered?
YY05 BLV is a 2005 Mazda 6, first registered on 24 March 2005.
Is YY05 BLV safe to buy?
The MOT history for YY05 BLV shows 23 tests with a 56.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YY05 BLV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YY05 BLV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.