MOT Status
ExpiredMileage
119,992 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear sill slightly corroded
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear sill slightly corroded
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear sill slightly corroded
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear sill slightly corroded
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust mounting defective (6.1.2 (a))
Exhaust silencer slightly loose (8.1.1 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive ALL 4 (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust mounting defective (6.1.2 (a))
Exhaust silencer slightly loose (8.1.1 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Suspension component mounting prescribed area is corroded but not considered excessive ALL 4 (5.3.6 (a) (i))
Emissions not tested (8.2.1.2 (d))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge bold inner edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge bold inner edge (5.2.3 (e))
Offside Front drivers floor pan corroded
Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Rear subframe corroded
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Inner Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Inner Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
centre exhaust hanger broken
corrosion to both inner sills/floors
offside rear link bar slightly worn
rear brake pads wearing low
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Headlamp aim too high (1.8)
Offside Front Headlamp aim too high (1.8)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YY06 BTE is a 2006 Mazda 3 in Silver with a 1,598cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 76.2%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying YY06 BTE, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YY06 BTE?
You can check the full history of YY06 BTE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YY06 BTE registered?
YY06 BTE is a 2006 Mazda 3, first registered on 31 March 2006.
Is YY06 BTE safe to buy?
The MOT history for YY06 BTE shows 21 tests with a 76.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YY06 BTE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YY06 BTE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.