MOT Status
ExpiredMileage
146,299 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge worn inner (5.2.3 (e))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive slii (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge bald inner (5.2.3 (e))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge worn inner (5.2.3 (e))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Exhaust mounting defective hanger broken (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Wheel nut(s) missing (4.2.A.1e)
Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside rear tyre signs of runflat damage
Child seat fitted not allowing full inspection of adult belt
nearside front wiper blade split
offside rear tyre showing signs of run flat damage
Offside front tyre low on pressure
Offside rear tyre has run flat damage
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YY06 BTF is a 2006 Mazda 3 in Grey with a 1,598cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 76.5%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying YY06 BTF, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YY06 BTF?
You can check the full history of YY06 BTF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YY06 BTF registered?
YY06 BTF is a 2006 Mazda 3, first registered on 31 March 2006.
Is YY06 BTF safe to buy?
The MOT history for YY06 BTF shows 17 tests with a 76.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YY06 BTF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YY06 BTF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.