MOT Status
ExpiredMileage
79,323 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Windscreen washer not working (3.5 (a))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced Sill Panel (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Off side front outer sill corroded......................
Offside Track rod end ball joint has slight play (2.1.3 (b) (i))
Off side Rear sill slightly corroded under the plastic cover
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear fog lamp does not emit a steady red light (4.5.4 (a))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Off side REAR sill slightly corroded under the plastic sill cover.
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Suspension arm pin or bush excessively worn small tie-bar (5.3.4 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Suspension arm pin or bush excessively worn small tie-bar (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
front tyres worn on inner edges
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
front tyres worn on inner edges
How Reliable is the Dodge Caliber?
Based on 69,277 MOT tests across 4,774 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YY08 PHX is a 2008 Dodge Caliber in Black with a 1,998cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 71.4%.
Across all 2008 Dodge Caliber models, the average MOT pass rate is 67.4% with a typical mileage of 59,760 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Dodge Caliber fails its MOT is suspension arm has excessive play in a ball joint, accounting for 3,411 recorded failures. If you're considering buying YY08 PHX, it's worth having these areas checked by a mechanic before committing.
The Dodge Caliber typically stays on UK roads for around 20 years. At 18 years old, this Dodge Caliber is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YY08 PHX?
You can check the full history of YY08 PHX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YY08 PHX registered?
YY08 PHX is a 2008 Dodge Caliber, first registered on 30 June 2008.
Is YY08 PHX safe to buy?
The MOT history for YY08 PHX shows 21 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YY08 PHX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YY08 PHX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.