2010 Honda Cbf

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Tyre is unsuitable (5.2.3 (a))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

swing arm and frame areas excessivly rusty

Drive chain excessively loose (6.2.1d)

Drive chain sprocket carrier worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Front Front position lamp does not illuminate immediately when switched on low beam (1.1.3a)

Nearside Front Handlebar handgrip not secure to handlebars. (2.1.1c)

swing arm and frame areas excessively rusty

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Centre stand partially seized

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Oil leak from engine

Rear Drive chain sprocket slightly worn (6.2.1e)

Steering movement slightly 'notchy' (2.2.1a)

Steering movement slightly stiff (2.2.1a)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear reflector on motorcycle missing (1.4.1)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)