2012 Land Rover Discovery

Nearside Front brake pad senor not fitted to pad

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

all rear seat belt buckle casings missing

engine cover and under trays

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front brake pad senor not fitted to pad

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

all rear seat belt buckle casings missing

engine cover and under trays

Offside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

engine cover and under trays fitted

Suspension arm pin or bush worn but not resulting in excessive movement Both front lower (5.3.4 (a) (i))

Brake performance unable to be tested (1.2.1 (g))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Suspension arm pin or bush worn but not resulting in excessive movement Both front lower (5.3.4 (a) (i))

Rear Seat belt buckle slightly damaged all 3 (7.1.2 (d))

Rear Seat belt flexible stalk damaged Nearside and centre. (7.1.2 (b) (i))

Central Rear Seat belt flexible stalk damaged (7.1.2 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Knocking noise. (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Knocking noise. (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords The inner edge is worn smooth. (5.2.3 (d) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords The inner edge is worn smooth. (5.2.3 (d) (i))

Central Rear Seat belt flexible stalk damaged (7.1.2 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Knocking noise. (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Knocking noise. (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Seat belt flexible stalk damaged 2 x buckle missing plastic cover (7.1.2 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Worn on edge (5.2.3 (d) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Worn on edge (5.2.3 (d) (i))

Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Seat belt flexible stalk damaged 2 x buckle missing plastic cover (7.1.2 (b) (i))

Offside Front Headlamp aim too low (1.8)

Nearside Rear Belt buckle missing plastic cover

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp not working on dipped beam (1.7.5a)

Front Brake pad(s) wearing thin (3.5.1g)