MOT Status
ValidMileage
114,684 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Nail in tyre Also perished ()
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Service brake efficiency below requirements (1.2.2 (a) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Electronic stability control wiring damaged but not excessively (7.12 (b))
Nearside Rear Nail in tyre Also perished ()
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Nail in tyre ()
Rear Sub-frame corroded but not seriously weakened /mounting (5.3.3 (b) (i))
Suspension arm pin or bush worn but not resulting in excessive movement Both rear trailing arm bushes (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Subframe mounting prescribed area is corroded but not considered excessive Subframe and suspension slightly corroded (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Subframe mounting prescribed area is corroded but not considered excessive Subframe and suspension slightly corroded (5.3.6 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Suspension arm pin or bush worn but not resulting in excessive movement Both lower arm rear bushes (5.3.4 (a) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Suspension arm pin or bush worn but not resulting in excessive movement Both lower arm rear bushes (5.3.4 (a) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Under trays fitted time of test
How Reliable is the Hyundai I30?
Based on 1,479,391 MOT tests across 127,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YY12 VWH is a 2012 Hyundai I30 in Silver with a 1,582cc diesel engine. This vehicle has been through 15 MOT tests with a personal pass rate of 66.7%.
Across all 2012 Hyundai I30 models, the average MOT pass rate is 75.2% with a typical mileage of 65,833 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I30 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 12,383 recorded failures. If you're considering buying YY12 VWH, it's worth having these areas checked by a mechanic before committing.
The Hyundai I30 typically stays on UK roads for around 19 years. At 14 years old, this Hyundai I30 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of YY12 VWH?
You can check the full history of YY12 VWH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YY12 VWH registered?
YY12 VWH is a 2012 Hyundai I30, first registered on 16 August 2012.
Is YY12 VWH safe to buy?
The MOT history for YY12 VWH shows 15 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YY12 VWH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YY12 VWH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.