2014 Qingqi Qm

Chain guard missing

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Wheel spoke slightly corroded (5.2.2 (d))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Suspension linkage (5.3.4 (a) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Brake excessively binding (1.2.1 (f))

Headlamp aim too low (4.1.2 (a))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Offside Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Rear Suspension arm pin or bush excessively worn Suspension linkage (5.3.4 (a) (i))

Chain guard missing

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Wheel spoke slightly corroded (5.2.2 (d))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Headlamp aim too low and too far to the left (4.1.2 (a))

Rear Drive chain sprocket so loose it is likely to fail Bolts Missing (6.1.7 (c) (ii)) DANGEROUS

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Headlamp aim not tested (4.1.2 (b))

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

Brake indicates slight fluctuation of brake effort Front (1.2.1 (e))

Brake indicates excessive fluctuation of brake effort Rear (1.2.1 (e))

Footrest missing rear (6.2.12 (a))

Headlamp aim too low Pattern no clear (4.1.2 (a))

Throttle control functioning such that safe operation of the motorcycle is adversely affected Revs rise on left hand lock. (6.2.7 (a) (ii)) DANGEROUS

Brake indicates slight fluctuation of brake effort Front (1.2.1 (e))

Speedo cable not connected (loose)

RH Switch insecure

Brake indicates slight fluctuation of brake effort Rear (1.2.1 (e))

Brake indicates slight fluctuation of brake effort Rear (1.2.1 (e))

Headlamp aim too low (4.1.2 (a))

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))