2004 Fiat Doblo

Emissions not tested (7.0)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Fuel pipe leaking (7.2.3)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front constant velocity joint is excessively worn (2.5.C.1b)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Stop lamp not working (1.2.1b)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Headlamp aim too high (1.8)

Parking brake lever has excessive side play in the pivot and may disengage (3.1.4a)

Nearside Front Headlamp aim too low (1.8)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Front Headlamp aim too low (1.8)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front constant velocity joint is excessively worn (2.5.C.1b)

Nearside Front Coil spring not correctly located (2.4.C.2)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Coil spring not correctly located (2.4.C.2)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Headlamp aim too low (1.8)

Nearside Registration plate lamp not working (1.1.5c)

Nearside Stop lamp not working (1.2.1b)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Emissions not tested (7.0)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

osf +nsf tyres inner edges worn

Nearside Front front brake juddering severely (3.7.A.2b)

Nearside Headlamp aim too high (1.8)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Offside Front front brake juddering severely (3.7.A.2b)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

osf+nsf tyres inner edge worn

Brakes imbalanced across an axle (3.7.B.5b)

Front front brake application uneven (3.7.B.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Registration plate lamp not working (1.1.5c)