MOT Status
ExpiredMileage
117,949 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive end sill (7.1.1 (a) (i))
Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive end sill (7.1.1 (a) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive end sill (7.1.1 (a) (i))
Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive end sill (7.1.1 (a) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Front Tyre worn close to the legal limit Both (4.1.E.1)
Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Sills both sides (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
front brake application uneven (3.7.B.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Driver's door cannot be opened from inside the vehicle (6.2.B.1b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Front position lamp(s) not working (1.1.A.3b)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Seat belt retracting mechanism defective (5.2.5b)
Offside Rear Seat belt retracting mechanism defective (5.2.5b)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YY54 ETZ is a 2005 Mazda 6 in Grey with a 1,999cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 63.2%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying YY54 ETZ, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YY54 ETZ?
You can check the full history of YY54 ETZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YY54 ETZ registered?
YY54 ETZ is a 2005 Mazda 6, first registered on 13 January 2005.
Is YY54 ETZ safe to buy?
The MOT history for YY54 ETZ shows 19 tests with a 63.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YY54 ETZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YY54 ETZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.