CarVerify

Free Car Check

YY55 AHK

2005 Mazda 6

Blue Petrol 1999cc
Search another vehicle

MOT Status

Expired
Expires30 Nov 2020
Tests18 (12 pass, 6 fail)
Pass rate66.7%

Mileage

127,886 mi
Last recorded127,886 miles
Recorded on30 Nov 2020
Typical for 2005 Mazda 677,324 mi

Significantly above average — investigate

4 checks still locked for this Mazda
Stolen
Finance
Write-off
Keepers
Unlock full report — £4.99
Instant £30k guarantee
or single check £9.99

Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.

Vehicle Details

RegistrationYY55 AHK
MakeMazda
Model6
Year2005
ColourBlue
Fuel typePetrol
Engine1,999cc

All premium checks include

50+ data points
Finance Check (Experian) Insurance Write-off Salvage Auction Stolen Check Previous Owners Ex-Taxi, Police, NHS Mileage Anomaly Import / Export Scrapped Check Plate Changes

MOT History

12 pass 6 fail
Fail 30 Nov 2020 127,886 miles

Emissions not tested (8.2.1.2 (d))

Engine mounting damaged or deteriorated resulting in excessive movement lower gearbox/engine mount (6.1.8 (a) (i))

Front Windscreen washer not working (3.5 (a))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced offside front - rear complete outer sill (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced center sill (6.1.1 (c) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower wheel arch (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt inner C.V gator split (6.1.7 (g) (ii))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower inner wheel arch (6.1.1 (c) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Windscreen wiper does not clear the windscreen effectively both fronts x2 (3.4 (b) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

front and rear suspension arm bushes starting to perish and crack

front tyres wearing on inner edges

Pass 24 Jun 2019 115,503 miles
Fail 24 Jun 2019 115,502 miles

Anti-roll bar linkage ball joint excessively worn BOTH FRONT (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Pass 13 Jun 2018 106,726 miles

front pads getting low

handbrake just met requirements

o/s and n/s sills surface corrosion

Fail 12 Jun 2018 106,723 miles

Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt x2 (5.3.4 (b) (ii))

Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt x1 (5.3.4 (b) (ii))

front pads getting low

handbrake just met requirements

o/s and n/s sills surface corrosion

Pass 15 Jul 2017 92,175 miles

Body has slight corrosion both outer sills plated (6.1.B.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Nearside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Fail 13 Jul 2017 92,156 miles

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Nearside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Pass 13 Jul 2016 86,372 miles
Fail 12 Jul 2016 86,372 miles

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Pass 30 Jul 2015 80,035 miles
Pass 5 Aug 2014 72,510 miles

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Pass 13 Aug 2013 65,737 miles

Child seat fitted not allowing full inspection of adult belt

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Pass 14 Aug 2012 58,603 miles
Pass 30 Aug 2011 51,052 miles
Pass 2 Sep 2010 41,482 miles
Pass 28 Sep 2009 33,562 miles
Fail 28 Sep 2009 33,562 miles

Offside Front wheel bearing has excessive play (2.5.A.3c)

Child seat fitted not allowing full inspection of adult belt

Pass 25 Sep 2008 25,449 miles

How Reliable is the Mazda 6?

Based on 1,904,140 MOT tests across 159,651 vehicles.

75.4%
Pass Rate
7,713
Miles/Year
24
Year Lifespan
159,651
On UK Roads

Top MOT Failure Points

Tyre tread depth below requirements of 1.6mm 45,082
position lamp(s) not working 38,980
Brake pad(s) less than 1.5 mm thick 34,576
Registration plate lamp not working 29,515
Windscreen wiper does not clear the windscreen effectively 28,494
Full Mazda 6 reliability report

Don't risk it. Know before you buy.

Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.

£30k guarantee Instant results Cancel anytime

YY55 AHK is a 2005 Mazda 6 in Blue with a 1,999cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 66.7%.

Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.

The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying YY55 AHK, it's worth having these areas checked by a mechanic before committing.

The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.

Frequently Asked Questions

How do I check the history of YY55 AHK?

You can check the full history of YY55 AHK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.

What year was YY55 AHK registered?

YY55 AHK is a 2005 Mazda 6, first registered on 30 September 2005.

Is YY55 AHK safe to buy?

The MOT history for YY55 AHK shows 18 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.

Does YY55 AHK have outstanding finance?

Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YY55 AHK. If you buy a car with outstanding finance, the finance company can repossess it.

No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.